苏州大学   |   English
瓦里斯江·塔依尔 (Alex)

师资团队

    瓦里斯江·塔依尔 (Alex)

瓦里斯江·塔依尔(Alex)

博士后/苏州大学沙钢钢铁学院/金属材料工程系

个人联系信息

通讯地址：苏州市相城区济学路8号苏大阳澄湖校区2教B107

电子邮件：sukd1602015@segi4u.my

学习工作经历

瓦里斯江·塔依尔，男，1991年出生，维吾尔族，现为统招博士后。2016年，在辽宁科技大学获得机械设计制造及其自动化专业的工学学士学位；2020年，在SEGi University获得硕士学位，导师为Ir. Dr. Shamini Janasekaran；2024年，在SEGi University获得工学博士学位（PhD），同样由Ir. Dr. Shamini Janasekaran指导。2025年，加入苏州大学吴鑫华院士团队，担任材料科学与工程流动站的博士后。近年来，以第一作者身份发表了14篇学术论文，其中包括2篇SCI论文和12篇EI论文，发表在Materialwissenschaft und Werkstofftechnik、International Journal of Lightweight Materials and Manufacture、Materials Today: Proceedings、Journal of Harbin Institute of Technology (New Series)等国内外高水平期刊上。论文累计被引用超过61次，H因子为3。曾参与超过10项基础研究项目和工业应用课题，并在国际竞赛中获得了多项荣誉，曾多次在国际学术会议上做口头报告，并获得最佳口头报告和墙报等奖项。此外，还受邀担任American Journal of Modern Physics、Journal of Engineering & Technological Advances等期刊的审稿专家。

主要研究方向

  1. 利用微波混合加热（MHH）作为低功率方法对轻质金属材料进行连接。

  2. 对轻质材料进行激光束和激光点焊接。

承担科研项目

  1. 项目“使用电磁辐射的铝合金（AA1100）接头”主要参与者，国家级项目（已结项），所属单位：SEGi University，2022-09 - 2023-11，150K林吉特

  2. 项目“使用电磁辐射对铝（AA1100）进行热处理”主要参与者，国家级项目（已结项），所属单位：SEGi University，2022-04 - 2022-09，150K林吉特

  3. 项目“使用MIG焊接的Inconel 625接头”主要参与者，国家级项目（已结项），所属单位：SEGi University，2020-01 - 2020-09，50K林吉特

  4. 项目“使用LBW焊接的Zincalume (G550)接头”主要参与者，国家级项目（已结项），所属单位：SEGi University，2019-06 - 2019-09，30K林吉特

  5. 项目“使用MIG焊接的Zincalume (G550)接头”主要参与者，国家级项目（已结项），所属单位：SEGi University，2019-01 - 2019-06，30K林吉特

  6. 项目“使用ABSMAW焊接的mild steel (AISI1080)接头”主要参与者，国家级项目（已结项），所属单位：SEGi University，2018-09 - 2019-02，70K林吉特

  7. 项目“使用电磁辐射的纯锌（Zn）和锡（Sn）粉末不锈钢（SS304）接头”主要参与者，国家级项目（已结项），所属单位：SEGi University，2020-09 -至今，150K林吉特

  8. 项目“使用搅拌摩擦焊接（FSW）的铝合金（AA1100）接头”主要参与者，国家级项目（已结项），所属单位：SEGi University，2024-01 -至今，30K林吉特

论著

发表论文：累计发表SCI：5篇EI：17篇CPCI：12 Scopus: 24篇Indexed: 2篇

  1. Tayier W, Janasekaran S, Tai VC. Influence of zinc (Zn) powder on the microhardness characteristic and microstructure properties of stainless steel SS304 hybrid joint using low power microwave heating. Materialwissenschaft und Werkstofftechnik. 2024 Feb;55(2):225-39. (第一作者，SCI Q3, Scopus)

  2. Tayier W, Janasekaran S, Tai VC. Study on lap joining and characterization of tin (Sn) powder on stainless steel SS304 using microwave heating. Materialwissenschaft und Werkstofftechnik. 2023 Dec;54(12):1659-72. (第一作者，SCI Q3, Scopus)

  3. Zhao Z, Janasekaran S, Fong GT,Tayier W, Zhao J. Laser Applications in Ceramic and Metal Joining: A Review. Metals and Materials International. 2024 Feb 6:1-40. (SCI Q1, Scopus)

  4. Yong Ge, Hiu Hong Teo, Lip Kean Moey andWalisijiang Tayier. Research on tool remaining useful life prediction algorithm based on machine learning. Engineering Research Express, 6(3),2024. (ESCI Q2, EI, Scopus) 5. Ge, Yong, Hiu Hong Teo, Lip Kean Moey, andWalisijiang Tayier. "Research on tool wear condition monitoring based on deep transfer learning and residual network."Engineering Research Express(2024). (ESCI Q2, EI, Scopus).

  5. Tayier W, Janasekaran S, Tai VC. Microwave hybrid heating (MHH) of Ni-based alloy powder on Ni and steel-based metals–a review on fundamentals and parameters. International Journal of Lightweight Materials and Manufacture. 2022 Mar 1;5(1):58-73. (第一作者，Scopus, EI)

  6. Tayier W, Janasekaran S, Vijayasree VP. Evaluation of heat input and bead geometry of zincalume steel (G550) welded joint between metal inert gas (MIG) and laser beam welding (LBW). Materials Today: Proceedings. 2022 Jan 1;48:895-904. (第一作者，Scopus, INSPEC, EI)

  7. Janasekaran S,Tayier W, Guan HS, Hong TH. Evaluating the Impact Toughness of Mild Steel Welded Joint Using Taguchi Method in Automated Shielded Metal Arc Welding. In Advances in Material Science and Engineering (Lecture Notes in Mechanical Engineering (LNME)) 2021 (pp. 341-348). Springer, Singapore. (第一作者，Scopus, CPCI, EI)

  1. Tayier W, Tai VC, Janasekaran S. The Numerical Simulation for Evaluation of Dimensions of Bead Geometry and Heat-Affected Zone (HAZ) of the Weld Joint. In Advances in Material Science and Engineering (Lecture Notes in Mechanical Engineering (LNME)) 2023 (pp. 385-394). Springer, Singapore. (第一作者，Scopus, CPCI, EI)

  2. Tayier W, Janasekaran S, Fook LK, Hong TH. The Optimization of Automated Based Shielded Metal Arc Welding Parameters on Welded Pool Geometry of Mild Steel Welded Joint Using Taguchi Technique. In Advances in Material Science and Engineering (Lecture Notes in Mechanical Engineering (LNME)) 2021 (pp. 356-363). Springer, Singapore. (第一作者，Scopus, CPCI, EI)

  3. Janasekaran S,Tayier W, Hoe GJ, Hong TH. Optimization of Tensile Strength in Automated Shielded Metal Arc Welding Using Taguchi Technique. In Advances in Material Science and Engineering (Lecture Notes in Mechanical Engineering (LNME)) 2021 (pp. 364-369). Springer, Singapore. (第一作者，Scopus, CPCI, EI)

  4. Tayier W, Janasekaran S, Hong TH. The Influence of Electrode Parameters on the Size of Heat Affected Zone (HAZ) of Mild Steel Welded Joint Using Taguchi Technique in Automated Shielded Metal Arc Welding. In Advances in Material Science and Engineering (Lecture Notes in Mechanical Engineering (LNME)) 2021 (pp. 349-355). Springer, Singapore. (第一作者，Scopus, CPCI, EI)

  5. Tayier W, Janasekaran S, Alzubydi AH. The Influence of Welding Parameters on the Microhardness of Zincalume Steel Welded Joint Using Taguchi Technique in Metal Inert Gas (MIG). In Advances in Manufacturing Engineering (Lecture Notes in Mechanical Engineering (LNME)) 2020 (pp. 315-321). Springer, Singapore. (第一作者，Scopus, CPCI, EI)

  6. Tayier W, Janasekaran S, Rajandran A. Feasibility Study on Metal Inert Gas (MIG) Welding on Zincalume G550 Steel. In Advances in Manufacturing Engineering (Lecture Notes in Mechanical Engineering (LNME)) 2020 (pp. 305-313). Springer, Singapore. (第一作者，Scopus, CPCI, EI)

  7. Walisijiang Tayier, Shamini Janasekaran, Syed Menhazul Bari. “Comparative Study on Microstructures of Zincalume Steel (G550) Welded Joint Between Metal Inert Gas and Laser Beam Welding”, Journal of Harbin Institute of Technology (New Series). (第一作者，Scopus, EI)

  8. Tayier W, Janasekaran S, Vijayasree VP, Tai VC. Morphology and microstructure studies of the zincalume steel joints using metal inert gas (MIG) process. In AIP Conference Proceedings 2023 Nov 27 (Vol. 2847, No. 1). AIP Publishing. (第一作者，Scopus, CPCI, EI)

  9. Tayier W, Janasekaran S, Mehrabi H. Influences of automatic shielded metal arc welding (ASMAW) parameters on the microstructure of welded AISI1080 steel. In AIP Conference Proceedings 2023 Nov 27 (Vol. 2847, No. 1). AIP Publishing. (第一作者，Scopus, CPCI, EI)

  10. Walisijiang.Tayierand Shamini Janasekaran. “Microwave Hybrid Heating Application for Stainless Steel Joint Analysis: A Fuzzy Logic Study on Microhardness and Evaluation of Microstructural Characteristics under Cold/Heat Processing”. LNME. Accepted for publication. (第一作者，Scopus, CPCI, EI)

  11. Salleh S, Alhallak M,Tayier W. Analysis of concrete performance from different waste as partial cement replacement. In AIP Conference Proceedings 2023 Jun 15 (Vol. 2599, No. 1). AIP Publishing.(Scopus, CPCI, EI)

  12. Shamini Janasekaran ,Walisijiang.Tayier, Ahmad Allam Siddiqui, Mohd Ridha Muhamad Mohd Fadzil Jamaludin and Amares Singh. Parameters Optimization of Aluminum Alloys using Friction Stir Welding. AIP Proceedings (accepted paper). (第一作者，CPCI, EI, Scopus)

  13. Janasekaran S,Tayier W. The Reduction of Green House Gases Egressions due to Covid-19 and the Ascent of Renewable Energy Generation in Malaysia. Journal of Engineering & Technological Advances. 2021 Oct 19;6(1):54-61. (第一作者，Indexed)

  14. Walisijiang. Tayier, Shamini Janasekaran. “Review of Microwave Brazed Joint in Industry 4.0” , International Journal of Psychosocial Rehabilitation. (第一作者，Scopus)

  15. Zhang S, Tan YC, Che HX, Tai VC, Sia YY, Janasekaran S,Tayier W. Optimization of Superhydrophobic Surface Preparation Using One-Step Immersion and Control Variate Method. In International Conference on Mechanical, Manufacturing and process Plant Engineering 2022 Nov 24 (pp. 312-321). Singapore: Springer Nature Singapore. (Scopus)

  16. Janasekaran, Shamini,Walisijiang Tayier, and Mohamed Nabil Awad. "MICROHARDNESS AND MICROSTURCTURE EVALUATION OF PREHEATED STEEL G550 THROUGH MICROWAVE HYBRID HEATING." Malaysian Journal of Microscopy 20, no. 1 (2024): 172-188. (第一作者，Scopus)

  17. Tayier, Walisijiang, Shamini Janasekaran, and Nashrah Hani Jamadon. "Microstructural Analysis and Microhardness Evaluation of Stainless Steel SS304 Joints Utilizing Microwave Hybrid Heating (MHH) and Cold/Heat Processing: A Fuzzy Logic Approach." Key Engineering Materials 982 (2024): 51-66. (第一作者，Scopus)

  18. Tayier, Walisijiang. "REVIEW OF STRUCTURE AND APPLICATION IN THREE-AXIS CNC MACHINING: ERRORS, TOOL PATH STRATEGIES, AND EFFICIENCY IMPROVEMENTS." Journal of Engineering & Technological Advances 9, no. 1 (2024): 28-41. (第一作者，Indexed)


奖励与荣誉

  1. ACS chapter，2024 2024-02，奖励级别：First price |获奖角色：International Competition

  2. ICMMPE 2023 2023-11， 奖励级别：Best presenter |获奖角色：International Conference

  3. IEM student research e-poster 2023，2023-08， 奖励级别：Bronze medal |获奖角色：National Competition

  4. iidex 2023，2023-05， 奖励级别：Silver medal |获奖角色：International Competition

  5. ICMMPE 2022，2022-11， 奖励级别：Best presenter |获奖角色：International Conference

  6. iidex 2021，2021-06， 奖励级别：Gold medal |获奖角色：International Competition

  7. UKM 2021，2021-04， 奖励级别：Gold medal |获奖角色：International Competition

  8. ICMMPE 2021，2021-04， 奖励级别：Best presenter |获奖角色：International Conference

  9. AMLPT 2019，2019-11， 奖励级别：Best presenter |获奖角色：International Conference

  10. iidex 2019，2019-04， 奖励级别：Bronze medal |获奖角色：International Competition

  11. Bronze medal for mathematical modelling competition，2011-06， 奖励级别：Bronze medal |获奖角色：National Competition